How To Configure Canon Pixma TR150 Setup?

Canon PIXMA TR150 comes with a 1.44 inch OLED display and its printing resolution is 4800 x 1200 dpi. It supports Wi-Fi with 5GHz. For your best convenience, you can use the mobile application ‘Canon PRINT’ for keeping a copy of your print on your mobile phone itself. If you want to know the steps for Canon Pixma TR150 setup, follow the procedure given below.

Unboxing Setup

  • Start unpacking all the contents given along with your printer.
  • Unwrap all the protective tapes and coverings.
  • Your box contains:
  • Two Ink Tanks (Black and Color)
  • AC Adapter
  • Power Cord
  • USB Cable
  • Print Head
  • CD-ROM
  • Manual
Canon Pixma TR150 Setup

Power on your Printer

  • Take the given power cord and connect it to the printer and an electrical socket.
  • Hold the Power button till you see ‘Canon’ on the touchscreen.
  • Now, select your preferred language and press OK.
  • Follow all the instructions you see on the touchscreen.

Assemble the Ink Tanks

  • Move the print head cover upwards and keep the Print Head into the print head holder.
  • Now, lower the print head cover back to the same position.
  • You will be receiving two ink tanks (Black and color) as mentioned above. Install the Black Ink Tank on the right side and Color Ink Tank on the left side.
  • The lights on the tanks should be lit now. If they don’t lit, you might have made some mistake in installing the printer head. Reinstall the printer head properly.

Load the paper

  • Move the print head cover upwards and keep the Print Head into the print head holder.
  • Now, lower the print head cover back to the same position.
  • You will be receiving two ink tanks (Black and color) as mentioned above. Install the Black Ink Tank on the right side and Color Ink Tank on the left side.
  • The lights on the tanks should be lit now. If they don’t lit, you might have made some mistake in installing the printer head. Reinstall the printer head properly.

Software installation

  • Insert the given CD-ROM into the CD drive and double click EasySetup.exe. It will install the printer driver.
  • If you do not have a CD drive on your computer, download the driver from the official Canon site.
  • Now, you have successfully complete the Canon Pixma TR150 setup.