Canon Pixma TS9520 Setup

• Take the Canon Pixma TS 9520 printer out of the box.
• Peel off the tapes stuck to the Canon Pixma device.
• Pull out the Pixma device's paper output tray.
• Connect the Canon Pixma TS 9520 printer's power cable to the power port and power outlet.
• Power on the Pixma device by touching the 'Power' button on its control panel.
• Set the language by touching the appropriate option and tap OK to begin the setup.

• Raise the top cover of the Pixma TS 9520 printer and install the printer cartridges.
• Load A4 sheets into the Pixma device's paper tray, adjust the paper width guides to hold the paper in place.
• Follow the Canon Pixma TS 9520 printer's prompts to connect it to your computer.
• Install the Canon MP driver on your computer to complete the setup.

Canon Pixma TS9520 Setup

Follow these guidelines to set up the Canon Pixma TS 9520 printer.

• Cut the adhesive tape covering the Canon TS 9520 printer box and pull the flaps back to access the contents of the box.
• Carefully remove the Canon Pixma TS 9520 printer out of the box. Discard the styrofoam packaging.
• There are tapes stuck to the surface of the Pixma device to hold the lids in place. Remove these tapes from the printer and discard them.
• Raise the Pixma TS 9520 device's front cover and peel off the tape which is stuck there. Close it. Then, raise the device's scanner assembly and remove the tape from there. Close the lid.
• Connect the Pixma power cable to the power port on the rear side of the Pixma device and the power port. Raise the Pixma device's control panel and touch the Power button to turn it on.
• Set the preferred language on the 'Language selection screen.' Tap the OK button to begin the print setup.

Canon Pixma TS9520 Unboxing Setup

These are the guidelines to unbox the Canon Pixma TS 9520 printer.

• Raise the Pixma TS 9520 printer's top cover to access the print cartridge slot. Remove the Pixma printer's cartridges from the packaging and remove the orange plastic component attached to them.
• Place these Pixma print cartridges in their slots and press down on the front portion of the print cartridges' top surface to lock them in place. Close the top cover.
• Tap the OK button when you see the 'Start alignment' screen. Remove the Canon Pixma printer's paper input tray and place paper sheets on it. Adjust the paper width guides to hold the paper sheets in place and take care not to crumple them.
• Load the paper tray which contains the paper sheets, into the Pixma TS 9520 printer.
• Place some paper sheets into the Pixma device's cassette tray and push the tray back into the printer. Tap OK on the Pixma device's LCD when you see the 'Load sheets in the cassette' prompt. Tap OK again.
• Now, the 'Canon usage statistics' prompt appears on the LCD. Tap Next. Finally, you can connect the Pixma device to a computer through a secure wireless setup.

• Check whether the Pixma TS 9520 printer is switched on. Extend the Pixma device's rear tray cover and paper support.
• Release the feed slot cover and move the right paper width guide to slide both the paper guides out.
• Place the photo paper with its print side facing up on the paper input tray. Make sure it is in the horizontal orientation.
• Move the right paper width guide to adjust both the paper width guides to hold the photo sheets in place.
• After adjusting the paper width guides, close the feed slot cover. Check the Pixma device's LCD for the media prompts. If the correct settings are displayed, tap Yes. If not, tap the Change button, change the media type, and then tap Yes.

• Raise the Pixma device's control panel. Extend the Pixma TS 9520 printer's paper output tray and output support. Launch the Easy-PhotoPrint Editor which is located inside the Canon Utilities program under All apps in the Start menu.
• Choose the Photos button found on the program and then click Browse. Highlight the photo you want to print and then click Open.
• Specify the printing preferences on the right-hand side of the screen, set the number of copies to be printed, and then click Print.

• To perform the scan operation from your computer to the Canon Pixma TS9520 printer, follow the instructions given below.
• Start the scan process by turn the Canon Pixma TS9520 printer On.
• After that, get the original document to be scanned.
• Open the scanner lid and place the original document facing down on the glass.
• Start the IJ Scan Utility feature on your computer and click the OK button.
• Click the Document or Photo option, in whichever format you need the scanned data.
• Now the Canon Pixma TS9520 printer starts the scan operation.

Canon Pixma Ts9520 Wireless Setup

• To perform the Canon Pixma TS9520 printer wireless setup, follow the instructions given below.
• Before you begin the wireless setup, check and make sure that you have done the initial printer setup process as per the instructions given in the user guide.
• Now, touch the Connect button on the Canon TS9520 printer screen.
• Press the Yes button. Wait for the printer on-screen process to complete.
• Once you have completed performing the on-screen instructions on the printer panel, the ‘Follow the instructions on the computer or smartphone to perform the operation’ window appears on the printer screen.
• Now, install the Canon TS9520 printer driver on your computer.
• Make sure to install the printer driver as per the instructions displayed on the installer screen.
• After completing the installation, try a test print.

Canon Pixma Ts9520 Wireless Direct

• To set up the Wireless Direct feature on your Canon Pixma TS9520 printer, follow the instructions given below.
• Navigate to the Network Settings section on the printer’s home screen.
• Touch the LAN settings button on the Basic Network Information screen.
• Select the Wireless Direct option on the LAN settings screen.
• Select the Wireless Direct active or inactive option and follow the instructions displayed on the printer screen to enable the Wireless Direct option.
• Try to print the Network Configuration page for your Canon TS9520 printer if you want to know its password.
• Now, enable the Wi-Fi option on your smartphone.
• Make sure to connect the Canon Pixma TS9520 printer and the computer to the same wireless network.
• Now, your hand-held device and the Canon TS9520 printer are ready for performing printer-related operations through the Wireless Direct feature.

Canon Pixma Ts9520 Ij Network Device Setup Utility

• The IJ Network Device Setup Utility is a feature that displays the status of your Canon Pixma TS9520 printer and the computer.
• To enable the IJ Network Device Setup Utility feature on your Mac device, follow the instructions given below.
• Launch the Launchpad and look for the Canon Utilities option.
• Select the IJ Network Device Setup Utility option in the Canon Utilities section.
• Now you will be prompted to type the username and password of your Mac device.
• Click the Installer Helper button after entering the required details.

Canon Pixma Ts9520 Firmware Update

• The initial step of the firmware update process is to download the printer firmware to your device.
• Connect your device to the Internet. Go to the printer and select the System Management option.
• Tap OK and then choose the Update Firmware option.
• Press the Via Internet option. Read the instructions and follow them to update the firmware.

• First, download the Apple AirPrint app on your iOS device and install it.
• Connect the Canon TS9520 printer and iOS device to the same wireless network.
• Extend the input tray and load the correct size of paper after aligning it.
• Press the Operation icon on the AirPrint application.
• Tap the Share icon and choose the Print option. Select the document or image you wish to print using the Canon printer.
• Choose the Canon Pixma TS9520 printer from the list displayed on the next screen.
• Modify the Print Settings on the next screen if needed.
• Select the Print option. The printing process will now begin.

• Turn on your Canon printer.
• Touch the Setup option on the home screen of the printer.
• Select the Device Settings option and click the Reset Settings option.
• Click the Reset All option to reset all printer the settings.
• Touch the Yes option to confirm the reset process. The default factory settings will be restored on the printer.
• Once you complete the reset process, personal data like passwords, security settings will get deleted from the printer to avoid third-party access when you dispose the printer.

Canon Pixma TS9520 Printer Offline

When the printer offline message displays on the screen, follow the instructions to resolve the printer offline error message on Windows 10.

• Click the Windows key and enter the letter R in the search bar to search the Run feature.
• Open the Run box, select the Control Printer option, and click OK.
• Right-click the printer icon to open the drop-down menu.
• Click the See what’s printing option on the menu.
• When the new window displays on the screen, select the Printer tab.
• Click the Use Printer Offline option and mark the box next to the option.
• Once you are done with choosing the settings, close and exit the window.
• When you choose an incorrect printer while assigning a print job, it may lead to the ‘Printer Offline’ error.
• Turn off your printer and after a few seconds, turn on your printer to fix the issue.

Canon Pixma TS9520 Not Printing

• Ensure that your printer is turned on. The ON light glows during the printer initialization.
• Do not use a relay device like a USB hub, instead connect the printer to your computer directly using the USB cable. Check the USB cable. You cannot perform a print job when the USB cable is worn out. If so, change the USB cable before you start the print operation.
• The paper settings should match the information set for the rear tray. If not, you may get an error message on the touch screen of the printer.
• Use the Canon IJ Status Monitor to delete the undesired printing jobs from the print queue. Deleting procedure may vary depending on the Operating System you are using.
• Remove the paper output tray from the printer and place it properly in the correct position that is suitable to perform printing.
• Once you fit the paper output tray properly, touch the OK option on the printer’s touch screen.
• Make sure to install the printer driver for your printer. Prefer the latest version of the printer driver for your printer model. Make sure to select the name of your printer in the Print Dialog box.
• It takes a long time to print the large file, wait for a minute to start printing the large file. Select the ON option to enable the ‘Prevention of Print Data Loss’ feature to start printing the large file. The print quality may reduce when you turn on this feature.
• Restart your computer and start performing a printing operation.

• Turn on your Canon printer.
• Place the A4 sheet or letter-sized plain paper in the cassette and insert the cassette into your printer.
• The paper setting confirmation screen will appear on the touch screen of the printer and choose the page size.
• After choosing appropriate settings, touch the Yes option. If not, touch the Change option and do the necessary changes.
• Open the operation panel and remove the output tray from the printer.
• Touch the Setup option when the Setup menu screen appears on the operation panel.
• The maintenance screen will display on the panel. Select the Maintenance option.
• Touch the Cleaning option from the list.

• Select the Yes option when the confirmation screen displays on the operation panel.
• Now, the printer starts to clean the print head automatically.
• Wait till the print head cleaning to complete.
• Once the print head cleaning is over, you will get the pattern print confirmation message on the screen.
• Select the Yes option to print the nozzle check pattern.
• Check for the missing lines or horizontal white streaks in the patterns A, B, C and D.
• If you still see missing lines or horizontal white streaks, repeat the print head cleaning.