Ij Start Canon Ts5100 Setup  

Setting up the Canon TS5100 printer is very easy when compared to the connection process. You can either use the user manual and go through the instructions mentioned below to begin the setup process.

Ij Start Canon Ts5100 Unboxing Setup

  • The printer comes in a packaged box. Use scissors to cut the tape on top of it.
  • Open the flaps of the box and then take the printer out of it. The packaging materials are present inside and outside the box.
  • Remove them from the box. The box contains various resource materials.
  • The materials are power cable, USB cable, ink cartridges, user manual, Starter CD and warranty card.
  • Determine if there is any external damage to the cable. If any, replace them. Take the power cable out of the box.
  • Plug one end of the terminal to the printer’s rear and the other end to the system’s rear Power up the printer using the Power button.
  • Open the input cassette and mount plain sheets of paper into it. Set the paper width guides at both edges of the paper.
  • Open the cartridge door and then put the ink cartridges into their holders. Wait until the printer delivers an alignment page.
IJ Start Canon TS5100

Ij Start Canon Ts5100 Driver & Manual Download

A driver for your printer is available on the starter CD, download the driver from our website. If the Canon driver is not up to date, you can download the driver. Click the driver link to begin the download process. The setup file of the driver may vary based on the operating system version. Download the manual for the printer from our website. Choose the link on the page to begin the download.

Driver Download
Manual Download

Ij Start Canon Ts5100 Print

Printing is the process of creating hard copies of the original stored in the system. The file is available in a text or image format. Go through the simple steps to print from the printer.

Ij Start Canon Ts5100 How To Print

  • Turn the printer on and bring it to the active state if it is in the Sleep mode.
  • Power up the Canon TS5100 printer with the help of the Power button.
  • Open the destination folder to choose the document or photo to print.
  • Pull the input cassette and mount plain sheets of paper into it.
  • Move the paper width guides at the edges of the paper.
  • Click the File option and press the CTRL and P keys at a time to open the Print Dialog box.
  • Modify the print settings if required.
  • Click the Print option to start the printing process.

Ij Start Canon Ts5100 Copy

Perform the Two-sided copy operation on the printer. This printer also supports reducing or enlarging the copies during the Copy operation. You can use handheld devices to assign Copy operation on the printer. Finish the initial set up and then try a test copy.

Ij Start Canon Ts5100 How To Copy

  • Initially, finish the basic printer set up process and turn it on. Open the input tray and load sufficient paper into the tray.
  • Make sure to load only A4 and blank paper into the tray. To set a copy, go to Printer Settings, and select Copy.
  • In this printer, the Copy option is available on the Home screen. Select Standard copy. Use the arrow keys to choose the selection. Press the OK button after selecting the option.
  • Lift the printer lid, and place the document on the platen glass. Set your preferences such as a number of copies, print setting items, and preview screen.
  • In Print setting, enter the number of copies you need. This includes the intensity level, page size, and type. Press the Color button for color copy and Black for black & white copying.
  • Now the printer starts the Copy operation. Once the copy process is complete, check the Result.

Ij Start Canon Ts5100 Scan

Canon ts5100 printer supports the Scan operation from the computer, operation panel, and smartphone or tablet. This printer supports most file formats. Set the Network Scan Settings of the printer and then start the Scan operation as per the guided instructions. After finishing the operation, preview the Scan result.

Ij Start Canon Ts5100 How To Scan

  • First, let’s see how to perform an Auto scan operation. Start the Scan operation by switching your printer ON.
  • Lift the printer lid and place the document you wish to scan.
  • Now, enable the Scan operation on your computer.
  • If your operating system is Windows 7, then click Start --> All Programs --> Canon Utilities --> IJ Scan Utility --> IJ Scan Utility. If your Windows version is 10, then tap Start, select All apps --> Canon Utilities --> IJ Scan Utility.
  • After setting it, click Auto. To save the scanned file, click the Settings option and choose a location.
  • Similarly to scan specific items such as documents & photos, select the Document & Photo option in the Canon IJ Scan Utility section.

Ij Start Canon Ts5100 Usb Port Setup

  • On your system, install the printer driver, and start the printer installation process.
  • Go to Control panel, select Device & Printers, and choose your printer from the list.
  • Choose the USB connection in the Select Connection method page.
  • Click the Next button.
  • Now, connect the USB cable to the printer.
  • Disconnect the USB cable, if prompted by the Window screen.
  • Click Next after disconnecting the USB cable.
  • Link the USB cable to your printer and computer.
  • Now turn on your printer and then try a test print.

Ij Start Canon Ts5100 Wireless Connection

  • Follow the steps given here to connect your Canon TS5100 printer and computer through a wireless connection.
  • Turn on your computer and enable the Wi-Fi option.
  • Select a wireless network of your choice and key in the credentials when prompted.
  • Make sure you enter the correct password.
  • Now go to the printer and check if the Power lamp is lit.
  • Tap the Home button on the control panel of the printer.
  • Make use of the navigation keys to select the Wireless icon.
  • Choose LAN Settings and then tap Wireless LAN.
  • Select Wireless LAN Setup and tap OK.
  • Choose the Easy Wireless Connect option.
  • Connect it to the same network as the printer.
  • Your printer and computer are now connected wirelessly.

Ij Start Canon Ts5100 Wireless Direct

  • Check if the Canon TS5100 printer is turned on.
  • Choose the Setup option from the home screen.
  • Tap Settings and then select the Device Settings option.
  • Go to LAN Settings and press Wireless Direct.
  • Press ON under the Wireless Direct Active/Inactive option. Choose OK.
  • Enable the Wi-Fi feature on your device.
  • Choose the printer with the name Direct in it.
  • Key in the security key to connect to the printer.
  • The printer and the device are now connected through Wi-Fi direct.

Ij Start Canon Ts5100 Ij Network Device Setup Utility

  • The first step is to download the MP driver package.
  • Install it on your computer by following the prompts displayed on the screen.
  • The IJ Network Device Setup Utility is mainly used to diagnose any problem related to the network and repair it.
  • After installation, go to the Start button and choose the All Apps option.
  • Select the Canon Utilities option and then click IJ Network Device Setup Utility to open it.
  • Tap Yes after checking the message that is displayed on your screen.
  • Click the Diagnose and Repair option.
  • Read through the prompts and follow them to rectify any network errors.
Canon TS5100 Setup

Ij Start Canon Ts3100 Scan

Scanning changes the hard copy into a soft one. You can either use the Scan button or Scan software to initiate the scanning process. Proceed with the steps below to start scanning.

Ij Start Canon Ts5100 Troubleshooting

  • When you get stuck while using the IJ Start Canon TS5100, you can diagnose it with some guidance.
  • Users can do troubleshooting if a paper jams, output quality deteriorates, the printer is not available, or cartridges are not working.
  • The basic troubleshooting steps will include checking the power supply and its respective connections, network connections, driver update, restarting the devices associated (printer, router, PC/mobile) and more.

Ij Start Canon Ts5100 Printer Not Working

  • When your IJ start Canon TS5100 printer isn’t working, then you need to follow some basic troubleshooting steps.
  • Initially, for any printer that doesn’t work, you have to check whether you have turned it on (switch and the power button).
  • Verify all the cable connections that ensure a proper power supply are securely plugged.
  • Restart your printer by unplugging all the cables and inserting them back into the device. Check if it works, after you turn it on.
  • If the print job gets stuck (turns off unexpectedly), then touch the Setup button to select the ECO Settings.
  • Select the Energy Save Settings OK Auto Power Off OK Off OK.
  • Now check if your printer works properly.

Ij Start Canon Ts5100 Not Printing

The solutions to follow when your IJ Start Canon TS5100 is not printing are as follows.

  • You need to verify whether your Canon TS5100 printer is turned on.
  • Check if the USB cable connected to the printer and the computer is secure.
  • In case of a wireless connection, check if your router provides an adequate signal.
  • The paper settings set to print should match the material loaded in the cassette.
  • There are chances of you selecting a wrong printer driver. Check if you have selected your printer name in the Print dialog box.
  • The printer may take some time in the case of a large print job. If it doesn’t start after some time, then turn on the Prevention of Print Data Loss option.

Ij Start Canon Ts5100 Usb Connection Problem

The printer decelerates its speed if the system surroundings aren’t compatible with your Hi-Speed USB. Remember only the speed reduces, but your printer works as usual. Hence you need to verify certain conditions. This ensures that your system environment is supporting the Hi-Speed USB connection.

  • Make sure that your computer’s USB port supports the Hi-Speed USB connection.
  • It is always recommended to use a certified USB cable.
  • Check if your USB cable or the USB hub port is supporting the Hi-Speed USB connection.
  • Avoid using a USB cable which is longer than three meters.
  • Check if the driver corresponding to the Hi-Speed USB functions on your system.
  • Download and install the latest version of the driver if required.

Ij Start Canon Ts5100 Scanning Problem

IJ Start Canon TS5100 faces multiple scanning issues like scanner not working, ScanGear isn’t starting and more. This can be diagnosed by the user.

  • If your scanner doesn’t work, then try connecting your USB cable to a different port and check the network status or restart the computer.
  • For the ScanGear issue,
  • Check if the MP Driver is installed.
  • Launch the Scan application and check if it supports TWAIN.
  • Try using the IJ Scan Utility and look for the files in your application.
  • Make sure you have placed the original document in the ADF properly.
  • Uninstall the MP Drivers and IJ Scan Utility and reinstall them if you face issues after an update.
Canon TS5100 Scanning Problems